8 Easy Fixes Error 0x80300024 When Installing Windows 10/11

8 Easy Fixes Error 0x80300024 When Installing Windows 10/11. Many users report getting the error code 0x80300024 when trying to install Windows. The following error message appears: “Windows could not be installed in the selected location. Error code 0x80300024.

Error 0x80300024 occurs with any version of Windows, but most often when installing or reinstalling Windows 7 and Windows 10. Sometimes this error also occurs when upgrading to Windows 10.

The error is usually caused by a lack of space on a particular drive but is sometimes due to corrupted or damaged installation media. So make sure your system meets the minimum system requirements for the version of Windows you want to install. In this article, you’ll follow some Fixes Error 0x80300024 When Installing Windows.

What causes error 0x80300024 during Windows installation?

There is not enough free space on the hard drive where you are trying to install Windows.
A damaged or corrupted Windows installation media can also cause Windows 10 installation error 0x80300024.
The hard drive is defective.
The USB port to which the installation media is connected is incorrect or not working.
Error or incompatibility between the hard drive and the driver software.
A loose connection between the installation target and the installation unit.
Hardware or software problems.

These are some of the possible causes of Windows errors.

How to fix the 0x80300024 error when installing Windows 10/11?

Solution 1: Check the Connection of the Accessories

First, make sure that all the necessary accessories are connected correctly. In particular, make sure that the connection between the device and the installation location is stable.

Scratches on the connection cable can affect the Windows installation, so make sure that the cable is not scratched. Also, make sure that there is enough space at the installation location. Once you have checked all this, restart your computer and check if the error code 0x80300024 has been resolved. If not, try the solution below.

Solution 2: Remove Unnecessary Hard Drives

If your computer is connected to more than one drive, you may receive an error stating that Windows could not be installed on your computer.

This is because if you try to install Windows on one of these drives, the other drives will interfere with the installation, resulting in the error code 0x80300024 for a failed Windows installation.

If this is the case for you, delete all drives on which you do not want to install Windows. Then try reinstalling Windows to check whether the problem is resolved or not. If the problem persists, try other solutions.

Solution 3: Use a Different USB Port to plug in Installation Media

If a USB port is used to install Windows and the error 0x80300024 occurs, this may indicate a problem with the USB port to which the installation media is connected. It is also possible that the installation medium has been connected to an incorrect port.

Therefore, try to troubleshoot other USB ports and see if you can successfully install Windows via other USB ports.

Solution 4: Set Target Hard Drive at the Top of the Boot Order

If the hard drive you want to install Windows on is not at the beginning of the boot sequence, error code 0x80300024 may also appear during Windows installation.

To resolve this error, you must configure the driver sequence in the computer’s BIOS at boot time. To do this, follow the steps below:

Start the computer.
When the computer boots, press one of the F1, F2, or Delete keys to access the computer’s BIOS settings. If you cannot access the BIOS using these keys, you can find out which key to press in the computer’s manual.
Find the setting/sequence to load the computer’s BIOS. It can be found in the Boot tab in the BIOS.

Make sure the hard drive you want to install Windows on is located at the top. If it is not, move it to the top.
Save your changes and close the BIOS.

Solution 5: Use DiskPart

This Windows installation error can also be caused by a corrupted hard disk partition table. To fix error 0x80300024 on a Windows 10 computer, run DiskPart as follows:

Find the system partition and select it while the installation makes a list of partitions.
Press the Shift+F10 key combination and type Diskpart.
To make a list of all partitions, type List disks.
Then type Select Disk 1 (replace the number “1” with the partition number).
Type Delete and press the Enter key.
Now, check if the Fixes Error 0x80300024 When Installing Windows.

Solution 6: Format Installation Location

If the partition on the hard drive where you are trying to install Windows is not newly created, the existing data on it may interfere with the installation process.

As a result, error code 0x80300024 will be displayed during Windows installation. To avoid or correct this error, format the installation partition before installing Windows. Follow the instructions below to fix the installation error:

Insert the Windows installation disk into the computer and reboot it.
On the BIOS screen, select the option to boot the computer with the Windows installation disc inserted.
Configure the keyboard layout, language and other settings.
If you are asked about the type of Windows installation, select Custom (Advanced).
On the next page, click Disk Settings (Advanced).
Here you need to select the partition on the hard drive where you want to install Windows.
Click Format.
Confirm the action and wait until the hard drive partition is completely formatted.
Click the Next button.

This confirms that the hard drive has been converted to unallocated space. You can now create a partition and try to install Windows on it.

Solution 7: Free Up Disk Space

As the reasons suggest, the Windows installation error 0x80300024 can also be caused by insufficient disk space. In this case, space must be created on the hard disk to add Windows installation files. To do this, delete temporary files and unwanted or unnecessary files/folders. This will free up space on the hard disk so that you can easily install Windows without having to worry about running out of space.

Solution 8: Replace the Hard Drive

If you have tried all the above solutions and still can’t solve the problem, it may indicate a hard disk problem. If you are using a corrupted hard drive, you may get error 0x80300024 when installing Windows.

In this case, your only option is to replace the hard disk with a new one. After replacing the hard disk you can try to install Windows. Now the installation error should no longer occur.

Conclusion

Error code 0x80300024 can cause problems and prevent your computer from installing Windows. However, you can take precautions to prevent this error from occurring on your computer. In this article, we have described all the possible ways to Fixes Error 0x80300024 When Installing Windows. Make sure you follow them one by one to resolve the error yourself. However, if you still have questions, don’t hesitate to contact us. Feel free to share your suggestions and questions with us on Facebook and Twitter.